With a market leading 300 lumens emitted from the torch, the new Zone 0 TR-65 has 3 power modes, is lightweight, compact and robust. Reliable, durable and easy to use and carry, it is ideal for use in the most demanding work places.
Its 3 power modes offer maximum choice and flexibility. The highest power setting gives a class leading light output of 300 lumens. Medium power supplies a very useable light output for nearby illumination with an increased duration of up to 14 hours. On the lowest power setting, the torch provides a useful light to be seen by which will last for up to a staggering 159 hours.
The beam pattern is specifically designed for the optimum combination of spot and fringe light; perfect for viewing into the distance whilst providing enough nearby light to ensure safety from obstacles close at hand.
When the battery level falls to 15% of its maximum level, the battery charge indicator will flash (battery charge indicator only on TR-65 model), and the beam will be interrupted momentarily once every 5 seconds (both TR-60 and TR-65 models), clearly alerting the user and ensuring they need never be left in the dark.
Strong and robust, both models are made from impact and chemical resistant thermoplastic – the same tried and tested super tough material used on Wolf hazardous area torches for nearly 2 decades. The lens is made from toughened glass.
Ergonomically designed for comfort in use, it's large switch is easy to operate, even when wearing gloves. Two integral lanyard fixings allow the torch to be securely attached to a tunic, tool belt or bag.
A flatter back increases stability and a highly robust polymer clip keeps the torch firmly fixed in place, though it can be detached quickly if required and will ‘give’ if the user gets snagged on an obstacle.
|PRODUCT REFERENCE TR-65|
|PRODUCT DESCRIPTION||ATEX Right Angle Zone 0 Compact Safety LED|
|CODE||I M1/II 1G Ex ia I Ma/IIC T3/T4 Ga|
II 2D Ex ib IIIB T200°C Db
|TYPE OF PROTECTION||‘ia’ intrinsic safety|
|AREA OF CLASSIFICATION (GAS)||Zones 0, 1 & 2|
Gas Groups IIA, IIB IIC
|TEMPERATURE CLASS (GAS)||T4 + T3 (depending on cells)|
|AREA OF CLASSIFICATION (DUST)||Zones 21 & 22|
Dust Groups IIIA and IIIB
|MAX. SURFACE TEMP. (DUST)||T200°C|
|AMBIENT TEMPERATURE||-30°C to +40°C|
IECEx BAS 11.0116
|ENCLOSURE||Impact Resistant Thermoplastic, Chemical Resistant|
|BASE + LENS RING||Shock Absorbing Elastomer|
|BEAM TYPE||Spot with Fringe|
|LIGHT SOURCE||High Power LED|
|OUTPUT||High Power 300lm / Medium Power 150lm / Low|
|POWER SOURCE||4 x AA cells (LR6)|
|TYPE||4 x LR6 Primary Cells to IEC 60086|
|VOLTS||4 x 1.5v|
|LOW VOLT CUT OFF||Yes|
|LIGHT DURATION||Up to 7.0 hrs / 14 hrs / 159 hours|
|INGRESS PROTECTION||IP66 + IP67|
|WEIGHT (INC. CELLS)||330g|
|ATEX Zone||Zone 0, Zone 21|
|ATEX certification gas||I M1/II 1G Ex ia I Ma/IIC T3/T4 Ga|
|ATEX certification Dust||II 2D Ex ib IIIB T200°C Db|
|ATEX certification mining||I M1/II 1G Ex ia I Ma/IIC T3/T4 Ga|
|IECEx Certification no.||IECEx BAS 11.0116|
|IECEx gas certification||-|
|IECEx dust certification||-|
|IECEx certification mining||-|
|Ingress Protection||IP66 + IP67|
|Peak beam intensity||-|
|Runtime||up to 7 hours|
|Battery Type||4x AA|
|Weight with batteries||330 gr|