Streamlight Propolymer 3AA HAZ-LO - ATEX zone 0/20 flashlight

SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.

• High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
• "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
• Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
• Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
• Combination of visual and mechanical polarity protection ensures correct installation of batteries
• Light designed to not power on if batteries are installed incorrectly
• 3 "AA" alkaline batteries reduce battery and recycling costs by 25%
• C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours
• Sealed switch design protects it from corrosion caused by battery leakage
• One body electronic LED module mechanically attached to electronic assembly
• Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
• Regulated run time provides consistent performance throughout battery life
• O-ring sealed, dust-proof, water-tight enclosure
• IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
• 3 meter impact resistance tested
• Ergonomically designed for maximum hand comfort
• 7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
• Limited Lifetime Warranty
• ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135°C.
• Assembled in the USA
• RoHS compliant