ATEX Phones
ATEX Tablets
ATEX Wearables
ATEX Communication
ATEX Headsets
ATEX Pocket PC
ATEX Scanners
ATEX Measurement
ATEX Lighting
ATEX Camera's
ATEX Network Equipment
Rugged equipment
Add your review
Ecom Instruments Ex-MP4 a
€599,00
(€724,79 Incl. tax)
Delivery time on request
The intrinsically safe, non-contact temperature meter equipment Ex-MP4 a is a robust yet exceedingly handy and easy to use instrument for temperature measuring ex-hazardous areas. Read more
Description
Ecom Instruments Ex-MP4 a
The intrinsically safe, non-contact temperature meter equipment Ex-MP4 a is a robust yet exceedingly handy and easy to use instrument for temperature measuring ex-hazardous areas.
Characteristics
- extended measuring range: to +400 °C
- high accuracy
- simple operation
- quick response time
- laser target sighting
- Measure from Zone 1 into Zone 0
Description
The benefits of non-contact-measurement
- increased safety when determining the temperature of fast moving objects
- no antennas mean that frictional heat cannot affect the measurement
- no mark or blemish is left on the object being measured
Response time
- fast and accurate. Pyrometers respondto emitted energy and are around 20 to 1000 times quicker than traditional direct contact thermometers
Low maintenance and non invasive
- the temperature of the object being measured is not affected by the procedure
- non contact of the detector means no wear and tear
- no fixing or fastening points required on either the object or equipment
Hard to reach objects and moving materials
- the optics of the pyrometer are aimed at the object to be measured and with the laser sighting it is possible for both small and distant objects to be targeted
- hazardous and aggresive materials can be safely measured - and without fear of damaging the equipment
- the compact size of the pyrometer allows it to be used in even the most awkward positions, with only a clear line of sight to the target area being required
- with direct contact measurement, poor heat conduction or heat capacity of the object can prevent insufficient heat flow to a measuring device.
Specifications
| Temperature range | -18 °C … +400 °C |
| Display resolution: | 0.2 °C |
| Accuracy (23 °C): | -18 °C … -1 °C ±3 °C, -1 °C … +400 °C ±2% or ±2 °C of reading -whichever is greater |
| Repeatability: | ±2% of reading or ±2 °C - whichever is greater |
| Response time (95%): | 500 msec |
| Emissivity: | preset 0.95 |
| Optics D/L: | =1/8 |
| Spectral response: | 7 µm - 18 µm |
Technical data
| Laser class: | Class 2 |
| Humidity: | 10 to 95% r.H. (non condensing at up to 30 °C) |
| Ambient temperature: | 0 °C … +50 °C |
| Storage temperature: | -20 °C … +65 °C (without battery) |
| Power supply: | 1x IEC 6LR61 (type approved) |
| Dimensions: | 152 mm x 101 mm x 38 mm |
| Weight: | approx. 200 g |
Ex-designation
- II 2 G Ex ia op is IIC T4
EC-Type Examination Certificate
- EPS 10 ATEX 1 242 X
Specifications
| ATEX Zone | Zone 1 |
| ATEX certification | EPS 10 ATEX 1242 X |
| ATEX certification gas | II 2G Ex ia op is IIC T4 |
| ATEX certification Dust | - |
| ATEX certification mining | - |
| IECEx Certification no. | - |
| IECEx gas certification | - |
| IECEx dust certification | - |
| Ingress Protection | No |
| Weight with batteries (gram) | 200 g |
| Battery Type | 6LR61 (9v) |
0 stars based on 0 reviews
0 Reviews