CorDEX UT5000 Thickness Gauge – ATEX & IECEx Certified
UT5000 Intrinsically Safe Thickness Gauge with CorDEX CONNECT™ measures metal thickness for Non-Destructive Testing (NDT) and Predictive Maintenance (Pdm) on pipelines and fixed equipment within hazardous locations. Read more
END OF LIFE, NOT LONGER AVAILABLE
UT5000 Intrinsically Safe thickness gauge with CorDEX CONNECT™ measures metal thickness for Non-Destructive Testing (NDT) and Predictive Maintenance (Pdm) on pipelines and fixed equipment within hazardous locations.
UT5000 is a next generation thickness gauge packed with proven technologies: CorDEX CONNECT™ uses RFID + Software to tag measurements with their location then organises the data, giving the engineer a view of the pipeline at any specific location.
The unique corrosion mode option helps identify spots of thinning; MultiECHO™ technology improves accuracy on uneven surfaces; onboard memory stores up to 1000 readings.
The CorDEX UT5000 is ATEX and IECEx certified for Gas & Dust (Zone 21). From storage tanks to dust conveyors, UT5000 can measure thickness and detect safely problems in virtually any explosive environment. The Ruggedized transducer and Brass wear ring prevent undue wear on the transducer surface and ensure the UT5000 is as tougher than most.
Designed for rugged environments, the shock resistant skin protects a 3.1 inch (8cm) colour screen and has easy-to-feel raised buttons. The intrinsically safe dual-element, 4MHz transducer is adjustable up to 8Hz with accuracy of +/- 0.05mm (0.01inch).
- ATEX and IECEx Certified for Zone 1 IIC T4 hazardous areas Features CorDEX CONNECT™ Intrinsically safe probe supplied as standard full Colour, backlit screen
- EchoEcho Technology to measure thickness through painted surfaces
- Drop-down menus to select the correct material velocity
- Multiple calibration and zeroing modes for repeatable accuracy
- On-board data recorder and RFID scanner, store up to a thousand automatically linked to tag location
- Menu ‘flip’ function allows use by both left and right handed technicians
|ATEX Certificate No.||Baseefa11ATEX0114|
|IECEx Certificate No.||IECEx BAS 11.0094|
|Memory||Stores up to 1000 measurements|
|Screen||8cm (3.1inch) RGB TFT colour screen with backlight Right/left handed set up|
|Material Velocity Selection||Preloaded via Drop-Down menu, or user defined.|
|Pulse Rate||Standard transmit pulse rate of 4Hz Adjustable from single shot up to 8Hz|
|Receiver Bandwidth||1MHz to 15MHz (-3dB points)|
|Frequency||4MHz, 3mm up to 100mm (0.01in to 3.9in)|
|Accuracy||+/- 0.05mm (0.01in)|
|RFID Tag Reader||• Operates with 13.54MHz passive tags|
• Detection range up to 5cm (1.9in)
• Supports ISO/IEC 15693-2, ISO/IEC 18000-3 tag formats
|Battery Details||• Lithium thionyl chloride primary 3.6V cell|
• 100 hours continuous operation with back light restrictions
• Low battery warning
|Operating Temperature||-10 to +50C (14 ̊F to 122 ̊F)|
|ATEX Zone||Zone 1, Zone 21|
|ATEX certification gas||II 2G Ex ib IIC T4 Gb|
|ATEX certification Dust||II 2D Ex ibD IIIB T200° DB|
|ATEX certification mining||-|
|IECEx Certification no.||IECEx BAS 11.0094|
|IECEx gas certification||Ex ib IIC T4 Gb|
|IECEx dust certification||Ex ibD T200° Db|
|Weight with batteries||1.1 KG|